How much does furnace cleaning cost?

How much does furnace cleaning cost?

$70 &#; $100basic cleaning cost$150 &#; $300advanced cleaning costGet free estimates for your project or view our cost guide below:Get free estimatesAre you a pro? Get new customers

$70 &#; $100 basic cleaning cost

$150 &#; $300 advanced cleaning cost

Get free estimates for your project or view our cost guide below:Are you a pro? Get new customersHow much will your project cost?TABLE OF CONTENTSWritten by Sarah NoelApril 29, Fact-checked by Tom Grupa

Furnace cleaning cost

A furnace cleaning costs $70 to $100 for basic cleaning or $150 to $300 for deep cleaning. The average cost to clean an oil furnace is $100 to $200. Total maintenance costs depend on the furnace condition, fuel type, and time since last service.

RE TECH supply professional and honest service.

Furnace cleaning cost National average cost $150 Minimum cost $50 Maximum cost $450 Average cost range $70 to $300

*Cost data is from research and project costs reported by HomeGuide members.

Get free estimates from furnace repair companies near you.&#;

Average cost to clean an oil furnace

The average cost to clean an oil furnace is $100 to $200. A full oil furnace cleaning typically includes an inspection, system tune-up, replacing filters, and cleaning the system&#;s main parts.

Additional costs may include:

• Chimney cleaning costs $150 to $375 on average. Oil furnaces produce more ash and soot than other fuel types.

• Oil tank replacement costs $1,200 to $4,600, depending on the tank size and location. Most oil tanks last 15 to 25 years before needing a replacement.

• Cleaning clogged oil lines underground costs $200 to $1,000 on average.

Furnace cleaning and service cost factors

Cost factors of furnace cleaning services include:

• Service type &#; Basic diagnostic inspections with minor cleaning are cheaper than cleaning the full furnace interior and its connections.

• Furnace type and size &#; Larger units take longer to clean. Oil furnaces have more parts to clean than gas or electric units.

• Discounts &#; Heating companies may offer discounts when combining cleaning with repairs, servicing multiple units, or other HVAC work.

• Accessibility &#; Labor costs increase for units in limited-access attics and crawlspaces.

• Season &#; Furnace companies may offer deals in the spring and summer.

• Labor &#; HVAC technicians charge $75 to $150 per hour, which varies by location.

• Warranty &#; Units under warranty get free part replacements but not labor.

• Repairs needed &#; Most furnace cleaning services don&#;t include repair fees.

• Service plan &#; Cleaning is often part of annual maintenance service plans.

• Condition &#; Old furnaces require more cleaning and more frequent repairs.

What does furnace cleaning include?

According to Energy.gov, a furnace cleaning typically includes:

Furnace cleaning types Basic inspection & minor cleaning Advanced annual maintenance cleaning

• Carbon monoxide leak test
• Furnace air-filter changing
• Checking thermostat & wiring
• Inspecting vents & fuel lines
• Checking heat exchanger & all parts for cracks
• Light cleaning of furnace surface, fans, sensors, ignitor, & burners only

• Inspection & diagnostics included
• Carbon monoxide leak test
• Furnace air-filter changing
• Check thermostat & wiring
• Inspect vents, fuel lines, & all parts
• Checking & cleaning heat exchanger
• Clearing condensate drain on high-efficiency furnaces
• Oiling internal moving parts
• Sealing loose duct connections
• Full HVAC system deep cleaning of all parts with higher-tier plans

Furnace clean and check cost

A furnace inspection check costs $130 to $200, which includes basic surface cleaning.

Additional deep cleaning and checkup costs may include:

Get free estimates from furnace repair companies near you.&#;

• Deep furnace cleaning costs $70 to $300.

• Air-filter replacement costs $100 to $175.

• Furnace tune-up costs $70 to $200.

• Furnace diagnostics inspection alone costs $70 to $130.

• Furnace repair costs $100 to $600.

• Air duct cleaning costs $200 to $1,000.

• Annual maintenance service plans cost $150 to $500 for a package deal including cleaning, inspections, general repairs, and priority bookings.

Signs your furnace needs cleaning

Signs you need a furnace cleaning include:

• Inconsistent indoor temperatures

• Unresponsive thermostat

• In-consistent airflow throughout the home

• Yellow or orange color change in the pilot flame

• Sudden increase in dust

• Strange furnace smells

• Spikes in energy bills

• Abnormally loud furnace noises

• Mold or water in the air ducts

• Frequent and abrupt system shutdowns

Furnace cleaning FAQs

Is furnace cleaning necessary and worth it?

Annual furnace cleaning is necessary to maintain energy efficiency, warranty coverage, prevent expensive repairs, and extend the unit&#;s lifespan.

Lack of furnace maintenance causes:

• Sudden furnace failures

  Are you interested in learning more about Arsenic Removal Furnace Service? Contact us today to secure an expert consultation!

• More expensive utility bills

• Frequent furnace part replacements

• Health risks from undetected carbon monoxide leaks

How often should you clean your furnace?

You should clean your furnace every 1 to 2 years with a professional HVAC company. A furnace more than 10 years old needs annual inspections and cleaning.

How long does it take to clean a furnace?

Professionally cleaning a furnace takes 1 to 3 hours, depending on the unit&#;s size, system type, and condition. Changing furnace air filters takes 5 to 10 minutes on average.

How much does it cost to clean a boiler?

Cleaning a boiler costs $150 to $350 on average, depending on the size, fuel type, and accessibility. Boiler service costs $70 to $125 for an inspection, which typically includes minor surface cleaning.

Get free estimates from furnace repair companies near you.&#;

Can you clean a furnace yourself?

You can clean a permanent furnace filter yourself. However, disposable filters need replacing every 2 to 3 months. Any other furnace cleaning requires professional service annually to maintain the warranty coverage.

Finding and hiring a furnace cleaner

Before hiring a furnace repair service near you, be sure to:

• Compare three or more bids from experienced cleaners.

• Choose businesses satisfying these licensing requirements:

  • North American Technician Excellence (NATE)

  • American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE)

  • National Air Duct Cleaners Association (NADCA)

  • Mechanical contractors license

• Select licensed, insured, and bonded service providers.

• Review their ratings on HomeGuide and Google.

• Verify the bids include all labor and equipment costs.

• Never pay in full upfront.

• Beware of the cheapest bids for low-quality cleaning or hidden extra fees.

Questions to ask

• Which types of furnaces do you typically clean?

• Can you give me references from past jobs?

• How long will the cleaning take?

• What does your standard furnace cleaning service include?

• Does it cost extra to replace all furnace filters?

• If I have a clogged furnace vent, is there an additional cost to clean it?

• How much is it to clean my furnace, vents, and the whole HVAC system?

• Can I get cleaning discounts with a maintenance service contract?

• Will you update my service records for warranty coverage?

• Do you also clean the floor around the furnace after finishing, or does that cost extra?

Cost to Clean Furnace

Furnace Cleaning CalculatorZip Code
Furnaces
Item detailsQtyLow  High Furnace Cleaning Labor, Basic
Basic labor to clean furnace with favorable site conditions. Power down unit. Remove all foreign matter from heat exchanger tubes. Clean vent outlet and area around air flow inlets. Reassemble and restart unit. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup.1 furnace$0.00$0.00 Furnace Cleaning Job Supplies
Cost of related materials and supplies typically required to clean furnace including: fittings, fasteners and mounting hardware.1 furnace$0.00$0.00 Furnace Cleaning Equipment Allowance
Job related costs of specialty equipment used for job quality and efficiency, including: Mops, floor cleaning and vacuuming tools, dusting implements, scrubbing tools. Daily rental. Consumables extra.1 furnace$0.00$0.00 Unused Minimum Labor
Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. Totals - Cost To Clean Furnace Average Cost per Furnace   Pros     Edit, Print & Save this in Homewyse Lists   Pros     Build job winning estimates quickly

Custom Calculators with Homewyse Lists

Service Professionals: create a reusable estimating app that is 100% customized to your business. Start with a template or build your own (free; Account sign up required):

 Interior Painting  Exterior Painting  Drywall, Tape and Texture  Residential Electrical  Handyman   See all Templates Cancel

In January the estimated cost to Clean Furnace starts at $176 - $449 per furnace. Use our Cost Calculator for cost estimate examples customized to the location, size and options of your project.

To estimate costs for your project:

1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.

2. Specify Project Size and Options Enter the number of "items" required for the project.

3. Re-calculate Click the "Update" button.

Cost to Clean Furnace - Notes and General Information

This example estimate is for BASIC work performed in readily serviceable conditions by qualified professionals, using popular, IN STOCK products, materials and supplies available at home improvement retailers. Your actual costs will vary due to the unique conditions, requirements, labor options and material choices of your project. Work not mentioned on this page, work with schedule difficulty, work during periods of local labor shortages, and work using master craftsman, premium materials, custom built products, project supervision may result in HIGHER COSTS!

This example estimate is for educational and illustrative purposes - it is NOT a substitute for written quotes from trade professionals. Homewyse strongly recommends that you contact reputable professionals for itemized assessments of work required and costs for your project - before making any decisions or commitments.

The example estimate includes:

• Costs for local material / equipment delivery to and service provider transportation to and from the job site.
• Costs to prepare the worksite for Furnace Cleaning, including costs to protect existing structure(s), finishes, materials and components.
• Labor setup time and mobilization time typical of local, small Furnace Cleaning jobs.

The example estimate does NOT include:

• Costs for any work or materials not specifically mentioned on this page.
• Costs for removing, relocating, repairing, or modifying existing framing, surface finishes (including molding) and fixtures, HVAC, electrical, and plumbing systems - or bringing any systems into compliance with current building codes.
• Costs for testing and remediation of hazardous materials (asbestos, lead, radon, etc.).
• General contractor overhead and markup for organizing and supervising the Furnace Cleaning. Add 13% to 22% to the total cost above if a general contractor will supervise this project.
• Sales tax on materials and supplies.
• Permit or inspection fees (or portion thereof) required by your local building department for your overall project.

References - Furnace Cleaning

• Product and Supplies Data: AC Wholesalers HVAC Products and Supplies AC Wholesalers, Jan , Website
• Product and Supplies Data: Alpine Home HVAC Products Alpine Home, Jan , Website
• Product and Supplies Data: Younits HVAC Products and Supplies Younits, Jan , Website
• Product and Supplies Data: Home Depot HVAC Products and Supplies Home Depot, Jan , Website
• Product and Supplies Data: Home Depot HVAC Products and Supplies Home Depot, Jan , Website
• Labor Wages and Costs: Building a Unit-Price System Journal of Light Construction, Jan , George Weissgerber
• Product and Supplies Data: The HUD PATH Rehab Guide Volume 8: HVAC/Plumbing U.S. Department of Housing and Urban Development Office of Policy Development and Research, Mar , Editorial Staff
• How to Size HVAC Systems Correctly, Pacific Northwest National Laboratory, Dec , Editorial Staff
• HVAC - Heating, Ventilating, and Air Conditioning Amer Technical Pub; 3rd edition, May , S. Don Swenson, ISBN
• Occupational Employment and Wage Statistics US Bureau of Labor Statistics, Jan , Staff
• Employer Costs for Employee Compensation US Bureau of Labor Statistics, Jan , Staff
• Project Spending Data: Harvard University JCHS Homeowner Expenditures Harvard University, Jan , Website

Furnace Cleaning Budget Management

This infographic highlights some of the decisions and job specific issues that could impact the actual cost of Furnace Cleaning - if applicable to your job.

Hiring Local Professionals

Our FREE hiring guide helps you hire wisely, get quality craftsmanship and understand fair pricing for your specific project.

Make Homewyse better

We value your input. So, let us know - did we meet your needs? how can we improve this site? Your comments and sharing are greatly appreciated!

If you want to learn more, please visit our website lead ore smelting plant supplier.

• Send your feedback or questions.
• Save and share Homewyse on social media using the buttons below: