Sign in
Explore Insights and Innovations in Mechanical Engineering through Guest Blogging
Explore Insights and Innovations in Mechanical Engineering through Guest Blogging
Your Position: Home - Refrigeration & Heat Exchange Equipment - 5 Maintenance Tips For Cold Storage Facilities - News
Guest Posts

5 Maintenance Tips For Cold Storage Facilities - News

Apr. 29, 2024

5 Maintenance Tips For Cold Storage Facilities - News

A cold storage facility is a space that stores food and other goods at temperatures below freezing. This is done to keep the food fresh, especially for meat products, which can spoil if left at room temperature for too long. 

If you want to learn more, please visit our website cold storage maintenance companies.

Notably, maintaining cold storage facilities is essential to ensure they operate efficiently. This guarantees the good quality of the goods stored in them. Without adequate maintenance, you could face significant problems with your storage and distribution center. 

Fortunately, you can research online to learn more about how cold storage facilities work and ways to maintain them properly. Also, there are reputable cold storage companies you can partner with for state-of-the-art cooling facilities to prolong the freshness of your perishable items. Most offer a short-term hold of products, so you can consider this storage option instead of overstocking your freezer. 

With that in mind, here are some essential tips to get you started with cold storage maintenance: 

1. Inspect The Refrigeration System

The refrigeration system is an essential part of any cold storage system. Therefore, it should be constantly monitored to ensure it’s running smoothly. The following are the essential components to inspect: 

  • Check the effectiveness of your refrigerator sensor:

    You can use a different professional thermometer to measure the accuracy of the refrigerator sensor. If you measure the coldness of the refrigerator and there’s a discrepancy between the temperature levels of the two devices, it means the refrigerator sensor needs to be fixed. Therefore, it’s necessary to calibrate or replace it. 

  • Inspect your compressor:

    Some aspects to check include the noise created, electricity consumed, and the cold produced. An unhealthy compressor makes too much noise and overheats. In that case, you should fix the problem right away. Alternatively, you can contact your cold store for a replacement if your refrigeration equipment has a warranty.

  • Check the evaporator’s health daily:

    The evaporator is situated inside a cold storage facility. It absorbs heat from the stored products. You should inspect it daily, primarily focusing on the air temperature, the sound produced, water or oil leakage, and mold growth.

If it’s loud or makes an unusual noise, produces hot air, and there’s water or oil leakage, you should repair it as soon as possible. However, if it’s extremely faulty, you should consider getting a replacement. 

  • Do a condenser quality check:

    The condenser is the outdoor portion of the refrigeration system, and its primary task is to cool down the refrigerant fluid. The condenser is healthy if the pipes leading to the refrigerant outlet are cooler. If they’re hot, it indicates the equipment isn’t working correctly and should be repaired.   

Notably, you should perform a monthly functionality test of the overall cold room refrigeration system and fix any malfunctions. And while doing the repairs, working with a professional contractor with advanced knowledge about how cold storage facilities work is vital.

2. Check All Electrical Connections

Inspecting all electrical connections in your cold storage facility is essential to ensure the proper flow of current. If some parts of the cold storage system don’t receive electricity, you can contact an electrician to find and repair the fault. Also, there are instances where the fuses may fail. In that case, you should ask the electrician to replace the fuse.

3. Keep The Facility Clean 

You should regularly clean your cold storage facility using the appropriate cold room cleaning products. This prevents the growth of microorganisms, such as bacteria or mold, that may contaminate the stored items. Here are other ways to keep your cold storage facility mold-free:

  • Use a clean and fully functioning vent

  • Check for air leaks and repair them. Air leaks may cause temperature fluctuations making way for mold to grow and thus result in product damage. 

  • Remove expired food items to prevent the spread of mold spores 

  • Regularly clean cold room door seals 

Generally, maintaining the interior hygiene and cleanliness of your cold storage system improves its efficiency.  

4. Monitor The Humidity Level Of The Cold Room

It’s necessary to monitor the humidity level of the cold storage facility daily. If it exceeds the standard levels, it can cause mold or bacteria and, thus, product spoilage. Digital hygrometers are used to check humidity in most cold rooms and refrigerated warehouses. 

However, it’s good to monitor the accuracy of the hygrometer itself using a professional hygrometer. If the two devices measure different humidity levels, it indicates your hygrometer isn’t fully functional. So, you should calibrate or get a new one.

5. Inspect The Walls, Floor, And Ceiling Of The Cold Room For Ice

Check your cold room’s walls, ceiling, and floor for a build-up of ice and eliminate it. Ice removal is essential, especially if you’re using the space to store vegetables and fruits since any amount of ice can spoil them. 

Large ice crystals cause cell wall damage and water migration; thus, fruits and veggies become dry and shriveled. So, eliminating ice from cold room surfaces is crucial to ensure quality food.  

Also, if you spot a pile of ice, your temperature sensor, compressor, or evaporator may not be functioning well. Therefore, you should inspect the equipment and make the necessary repairs.  

Conclusion

Continuous maintenance is critical to the success of your cold storage facility. Well-cared-for storage facilities operate at total capacity to protect the stored products. Therefore, the above are some maintenance tips to consider. Most importantly, immediately fix all problem areas to promote better performance and keep operations going.



7 Questions to Ask Your Cold Room Supplier

HOW TO BUY A COLD ROOM

 

COLD ROOM AND FROST ROOM is a great investment and you want to make sure you get quality products and craftsmanship from a well-established, respected company. We suggest you consider the following questions: -

 

1. How do I know it's good?

 

Don't be afraid to review your feedback, ask for customer details and see previous work to give you peace of mind.

For more insulation panels for cold roomsinformation, please contact us. We will provide professional answers.

 

Check if the company is KESKINSO registered, whether it has the QUALIFICATION CERTIFICATE and SOSİAD Certificate.

 

We offer authentic references and case studies, and we are happy to get you in touch with our customers and organize them to see our products and craftsmanship.

 

The area we serve is the symbol of 35 years of trust.

 

2. How do I know which room type I need?

 

Refer to the suggestion, providing as much relevant information as possible, and see the contents of the products on our website. We don't want to sell you online - there are a lot of things and we want to offer you the right product to meet your cold storage needs. Call us for advice and we'll see and evaluate all the necessary information on the spot.

 

3. Do you subcontract your installations yourself?

 

Ask if the company does its own installation and engineering work or if it is outsourced to a third party. This will help you determine if the company you're talking to has cold room expertise. We commit ourselves to all our installations that guarantee service consistency, from inquiry to construction to engineering. Our installation service promises you quality workmanship from experts responsible for their work.

 

4. How long does it take?

 

Ask how long it will take to get quotes, supply and set up your required cold room. We aim to bid within 24 hours, and we will always be honest about product availability and delivery time for installation. Usually we can deliver / ship within 5-7 days after order confirmation / payment. * All recommendations are free, and if a field survey is required, this service is offered free of charge.

 

5. Do you remove / relocate existing rooms?

 

Ask if the company can relocate existing cold rooms. We undertake decommissioning, including removal, relocation and reassembly. In some cases, we will purchase used rooms depending on age and quality.

 

6. What happens if I encounter a problem after the job is finished?

 

After-sales maintenance and something goes wrong, especially if a third person is setting up your room. We undertake all our installations, provide a 24-month parts warranty and are proud to offer a friendly, reliable service. If something goes wrong, we ask you to call us so we can deal with it correctly.

 

7. What is the best way to look in the Cold Room?

 

Your potential supplier should tell you the best way to take care of your cold room . We recommend you have a 6-month maintenance check to ensure that the cold room operates to its full potential efficiently. We are happy to advise on in-house maintenance.

 

* According to standard cold room installation (bespoke rooms are subject to 2 weeks delivery time)

 

If you would like to discuss our services to install a new, second-hand or staged cold room, or if you want to change, renew or relocate your existing cold room, please contact us on 0537 917 16 95 or visit our website at info@keskinso.com www.keskinso.com.

 

Using our industry expertise, we will offer a cold storage solution at a competitive price, tailored to your specific needs.

Want more information on different type of condenser? Feel free to contact us.

Comments

0 of 2000 characters used

All Comments (0)
Get in Touch

Copyright © 2020 Wordblogger.net

  |   Minerals & Metallurgy   |   Toys & Hobbies   |   Timepieces, Jewelry, Eyewear   |   Textiles & Leather Products   |   Telecommunications   |   Shoes & Accessories   |   Service Equipment   |   Security & Protection   |   Rubber & Plastics