5 Things to Know Before Buying Xiangtai Sculpture

Read more

You can find more information on our web, so please take a look.

This is a general guide to installing my statues on pre-existing concrete using standard fixings of threaded rod and glue.

All the glues below are appropriate, but some are better for different installations. The choice of glue you use among other factors, such as temperature, damp and strength required, is
dependent on how fast you would like it to cure. If you want a lot of time to make sure it is correct then the Tenax type glue would be better. If you are confident about the installation and you have done all the pre-checks before final applying glue then the other 2 types of glue, that premix in the nozzle would be much easier to use:
SikaAnchorFix®-1 Quite fast, reliable, easy mix adhesive.

Easyfix Kempsc 175ef Quite fast, reliable, easy mix adhesive. Good for damp conditions

Tenax Domo 10 much longer curing time, strong, weather resistance, less easy mixing and application

Required for installation:

Pencil

Padding to protect sculpture

Hammer drill

Masonry drill bits

Something to clean dust from drilled holes (the drill bits used slowly, a cloth, your mouth to blow, or compressed air)

Enough helpers to easily handle the statue

Small tool/spatula and cloth or paper to clean any errant glue. 

If using the Tenax glue mixing pots and spatulas for placing in the holes

Installation guide:

1. Familiarise yourself with the threaded rods and their receptors underneath the sculpture. While checking the underside, rest the sculpture on a padded surface to prevent scratching.

2. Place the sculpture in required positions without the threaded rods in the holes. 

3. Move and rotate the sculpture around until you are absolutely happy with the orientation and position.

4. Check that the sculpture is sitting flat. If the concrete is not level, then you may need to use spacers to level it. Spacers should be of a robust material like stone, hard plastic, or stainless steel.

5. Once all checks are complete, accurately mark the concrete at several places on outside edge of sculpture. Mark a directional arrow following a tail or outstretched limb. 

6. Remove sculpture and place threaded rods into receptors on base.

7. Lift sculpture into place on concrete and mark location of the threaded rods on concrete. If any threaded rods are clearly not vertical, extend the circular marking into an oval in the direction of the lean back upwards to the receptor. This hole will need to be drilled using a larger diameter bit.

8. Remove sculpture and drill holes to the required depth of the pins.

9. Remove as much dust from the hole as possible (do not use water, use the drill bit a cloth, blowing, or compressed air, keep the hole dry).

XIANGTAI are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

10. Place sculpture back with the pins going through the base plate and into the holes.

11. Check that everything is correct and the threaded rods sit properly in the holes with the sculpture sitting flat on the concrete. DO NOT PUT PRESSURE ON THE THREADED RODS to force them into the holes, but enlarge the holes to suit them.

12. Remove the sculpture and put the chosen adhesive into the holes (quickly if using the faster-setting glue). Depending on the diameter of the holes fill them about 1/2 full to 2/3rds full with glue. Excess may be smeared on the threaded rods.

13. Whilst glue is still wet immediately place the sculpture back with the threaded rods pushed into the holes, pushed down as far as they will go.

14. Quickly check that the sculpture is still in the correct position, flat and with the correct orientation. There may be a little leeway for correction.

15. Remove any glue that seeps put under the base plate or through the holes. Clean your tools thoroughly.

14. Leave glue to set. You can check how much the glue has set by checking the excess in your container. If the sculpture must be supported to remain at the chosen angle, then support the sculpture until the glue is dry.

For more information, please visit XIANGTAI.

Are you looking to buy bronze panther figurines in Qatar? Selecting the perfect piece can be a fun and rewarding experience. There are a few important factors to consider before you make your choice. Let&#;s explore them together!

1. Understand Your Purpose

Before you go shopping, think about why you want a bronze panther figurine. Are you decorating your home? Or maybe you want a gift for someone special? Knowing your purpose can help narrow down your options.

2. Choose the Right Size

Consider the space where you plan to display the figurine. Will it sit on a shelf, or do you want something for your coffee table? Measure the space to ensure the figurine fits well. As Ahmed, a local collector, said, &#;A smaller piece can get lost in a big room, while a larger piece can fill the void nicely!&#;

3. Decide on the Style

Bronze panther figurines come in many styles. Some are realistic, and others are more abstract. Think about what best fits your personal taste. Amina, a local artist, shares, &#;I love abstract designs. They can really spark a conversation!&#;

4. Check the Quality

Quality matters when selecting a bronze figurine. Inspect the craftsmanship. Look for smooth finishes and fine detailing. Rubina, a seasoned buyer, advises, &#;Always ask about the artist. Knowing their background can give you confidence in your purchase.&#;

5. Compare Prices

Prices can vary widely. Visit different shops and online platforms for comparison. Remember, sometimes paying a bit more ensures better quality. Khaled, a frequent shopper, mentions, &#;It&#;s worth spending a little extra for a piece that will last a lifetime.&#;

6. Look for Unique Features

Unique features can make a figurine stand out. Look for distinct poses or added elements that catch your eye. &#;I appreciate pieces that tell a story,&#; says Nora, a bronze figurine enthusiast. &#;They bring character to my collection.&#;

7. Verify the Supplier

Before making a purchase, it's vital to know your supplier. Are they reputable? Do they have good reviews? It&#;s always good to do a little research to avoid potential disappointment.

8. Ask Questions!

If you're unsure, ask! Don&#;t hesitate to reach out to the supplier with your questions. They are often more than happy to help. &#;Customer service makes all the difference,&#; notes Omar, a satisfied customer.

9. Make Your Purchase

Once you have done your research, it's time to buy. Keep your receipt and any information about the artist or supplier. This can be helpful for future reference.

10. Enjoy Your Figurine!

After your purchase, display it proudly! Every time you see it, remember the journey you took to find that special piece. It&#;s more than just a decoration; it&#;s a part of your story. &#;Every figurine has its own adventure,&#; says Layla, an avid collector.

Buying bronze panther figurines in Qatar can be straightforward and enjoyable. Armed with these tips, you&#;ll feel confident in your choice. Happy hunting! If you have questions or need assistance, don&#;t hesitate to contact us. We are here to help you find the perfect figurine from a trusted supplier.

If you are looking for more details, kindly visit our website.

Are you interested in learning more about Bronze Leopard Sculpture Qatar? Contact us today to secure an expert consultation!

If you are looking for more details, kindly visit Xiangtai Sculpture.