Curiousities of Suspension Clamp for Transmission Line
Curiousities of Suspension Clamp for Transmission Line
Suspention clamp are used to hang conductor or ground wire through insulator of link fitting to tower arms or substation structures. The clamp are made of malleable iron or aluminum alloy. The suspension angle of suspension clamps is not less than 25 degree, the redius of curve is not less than 8 times the diameter of the installed leads. The percentage of the grip on different kinds of leads to the calculating capicity of snap meets the international standard.
With competitive price and timely delivery, huaneng sincerely hope to be your supplier and partner.
What is Suspension Clamp
The suspention clamp is a kind of overhead line conductors. There are also two types of suspension hardware, including tension fittings and limited grip hardware. The suspension clamp hangs or supports the conductors, primarily bearing the vertical load hardware.
The Function of Suspension Clamp
The suspension clamp is used on overhead lines or substations. They can hang the conductors or arresters on the insulators or hang the arresters on the tower by the connectors. It also used for fixing and supporting the conductor and non-linear rod on the pole.
Type of Suspension Clamp
There are numorous kinds of suspension clamps. They can be classified in different method. Here are three method to classify them. Here we will introduce three ways to classify them.
Firstly, some of the abbreviations as follow: C(X)suspension clamp, G fixed, Sdouble clamp, UU shaped screw, Jstrenghthened, HAluminum Alloey, Fanti-corona, Kcarried up type, Tcarry bag type, Awith socket clevis eye, Bwith U-shaped clevis, Xhang-down type.
Classified by the structure of the suspension clamp
CGU suspension clamp
CGU suspension clamp is als called general type suspension clamp. The fixed u-shaped screw suspension clamp(CGU) can be costomized. All specifications are avaliable with the drawings porvided. All the products meets the international standards.
The materials: Clamp and plateforging iron; Closed pinstainless steel; spare partssteel
Suspension Clamp with U-shaped Plate
Main usage and feature
The diameter of the wire clip slot is large, when it is used for large section steel-cored alumimum conductors or conductors wrapped with pre-twisted wire sheathed grommets. If you use the common hanging plate, it is easy to cause deformation. These are the two reasons the U-shaped hanging plate is added to the upper end of the wire hanging plate. Due to such a combinaton, the bending movement of the hanging plate is reduced, and also change the direction.
Suspension clamp with socket clevis eye
Componants and materials
The socket and the socket are made of forging iron
The endfittings are stainless steel
Other mateirals is steel
All the componants are hot-dip galvanized zinc and are corrusion resistent.
Strenghthen suspension clampCGJ Type
Here are some main features:
Clamps have high vertical devastating load;
The cable will not get out of the clamp even in the condition of unblanced icing on adjacent gears. This means the clmaps may have enough tensile strenghth;
For the clip of the lightning conductor, the grip strength should be no less than 25% of the rated tensile strength of the steel strand, and the grip of the clip for the steel core aluminum stranded wire should be no less than 30% of the rated tensile strength of the wire.
Anticorona suspension clamp CFG Type
It is used for 330kv500kv transmission line or high altitude transmission line. This kind of clamp require high anti-corona ability. Typically, the componetns of the anti-corona type includes a flared hull, two (or four) bolts (to fasten the boat hull) and the steel hoop of the suspension part in the middle of the hull, which also known as the suspension bar type.
Materials: clamp and platealuminum alloy; deadend linkstainless steel; spare partssteel
This type of anti-corona suspension clip is divided into two types: line and jumper. The jumper one also can use on substation and has weak grip.
Classified by the position of rotating point
Center swing suspension clamp
Main features:
The axis of the hull is above the centerline of the wire, and its rotation coincides with the deflection of the wire.
Carried-up suspension clampCGF Type
Characteristics: The hull axis lies below the centerline of the wire and has a tendency to be unstable, and its rotation often exceeds the deflection of the wire.
Function: It is mainly used when the overhead ground wire is placed on the top of the tower, and when the split wire is to be arranged on the bar.
Hang-down suspension clampCGF Type
Material: clamp and plateZL102 aluminum alloy; deadend link stainless steel; spare partssteel
Carried bag type suspension clamp
Material: clamp and plateZL102 aluminum alloy; deadend link stainless steel; spare partssteel
Classified by raw materials
Aluminum alloy suspension clamp
Features: high strength, strong corrosion resistance, low hysteresis loss, low energy consumption and energy saving. It is also benefit to control the generation of corona. It is widely used on 330kv to 500kv transmission line or meet the requirement of the corona production in the high altitude area.
It is used on 220kV lines to replace the commonly used malleable cast iron lines, which has good economic benefits.
Steel plate punching suspension clamp
The hull of the wire clip is stamped from steel plate, without hanging plate. The hanging point is above the axis of the wire, and the u-bolt is upware installed for convenient construction. The production process is simple with short cycle, high yield, light weight and few accessories, etc. it is suitlable for installing steel-cored aluminum stranded wires and aluminum stranded wires of medium and small sections.
Melleable cast iron
The hull, plate and clevis is cast iron, the closd pin, and other spare parts are made by steel. We use hot-dip galvanized technic for cast iron and steel.
If you want to learn more, please visit our website earth wire suspension clamp.
- What is hysteresis loss?
Hysteresis loss: Due to the magnetic material in the AC iron core coil, in addition to the power loss of the coil resistance, hysteresis and eddy current can also be generated in the alternating magnetic field, resulting in power loss and heat generation.
If you are interested, our next passage is still about suspension clamp. We will introduce 7 other types of suspension clamp and how to choose a suitable suspension clamp.
Understanding Suspension Clamps And Strain Clamps
Suspension clamps and strain clamps are essential components in overhead power line systems, each serving distinct yet critical roles.
Definition of Suspension Clamps
Suspension Clamps are hardware used to support and suspend conductors from utility poles or towers. They are typically designed as U-shaped or C-shaped clamps that encircle the conductor, providing secure and reliable support.
Definition of Strain Clamps
Strain Clamps, also known as dead-end clamps, are used to anchor the line conductor from the pole, especially when the lines direction changes at extreme angles. They are designed to hold conductors under tension, maintaining the tension and alignment of conductors, which is crucial for preventing line sagging and ensuring the integrity of the electrical network.
Differences Between Suspension Clamps and Strain Clamps
Functionality
- Suspension Clamps do not apply significant tension but are designed to hold wires in place without restricting movement, making them ideal for various installations.
- Strain Clamps manage tension loads and maintain conductor tension, keeping conductors tight and secure, which is critical in high-stress areas.
Application
- Suspension Clamps are used in railway and transportation applications, where they support overhead lines while allowing for movement.
- Strain Clamps are particularly important in high-voltage applications and areas prone to severe weather, ensuring that lines remain taut and safe.
Material
Both types of clamps can be made from similar high-strength materials, but the specific requirements for tension or support may influence material choice.
Installation
- Suspension Clamps are generally easier to install, often just needing attachment to a support structure.
- Strain Clamps require precise tensioning to ensure they work correctly, which might involve using specific tools or techniques to achieve the right tension.
Environmental Performance
- Strain Clamps are built to withstand significant stress, making them ideal for harsh weather.
- Suspension Clamps prioritize flexibility to handle temperature fluctuations and wind loads without compromising the conductor.
Conclusion
The choice between suspension clamps and strain clamps depends on the specific requirements of the electrical system, including the need for tension management, support, environmental conditions, and mechanical loads. Both types of clamps play crucial roles in ensuring the safe and efficient operation of overhead power lines.
If you are looking for more details, kindly visit grading ring is also called.