Electrical Cable Manufacturing Capabilities

Key Features of our Electrical Cable Manufacturing Capabilities.

Key Feature Minimum Typical Maximum Number of Conductors Single 2 &#; 105 + Conductor Size 30AWG
(.05mm2) (1-28) AWG
(33.6-.08mm2) MCM
KCMIL Conductor Insulation Thickness
(.010 = 10 Mils) .005
(.13mm) .010 &#; .032
(.25 &#; .81mm) .125
(3.18mm) Jacket/Sheath Insulation Thickness
(.010 = 10 Mils) .005
(.13mm) .032 &#; .150
(.81 &#; 3.81mm) .250
(6.35mm) Finished Cable Diameter
(.010 = 10 Mils) .100
(2.54mm) .250 &#; 1.500
(6.35 &#; 38.1mm) 6.00
(152.4mm)

 

WIRE & CABLE STRANDING CLASS USES

Concentric-lay Conductors

• Class B: Power Cables.
• Class C: Power Cables where more flexible stranding than Class B is desired.
• Class D: Power Cables where extra flexible stranding is desired.

Rope-lay and Bunch-stranded Conductors

Class G and H shall have concentric-lay-stranded members and Class I, K, and M shall have bunched-stranded members.

If you are looking for more details, kindly visit our website.

• Class G: All cables for portable use.
• Class H: All cables where extreme flexibility is required, such as for use on take-up reels, etc.
• Class I: Apparatus cable and motor leads.
• Class K: Cords and cables composed of No. 30 AWG copper wires. Stationary service.
• Class M: Cords and cables composed of No.34 AWG copper wires. Constant service.

1XTech &#;Create&#; Custom Cable Manufacturing YouTube Video (16 seconds)

High-Velocity Wire & Cable Manufacturing Capabilities. 1XTech &#;Create&#; Cable Manufacturing YouTube Video (16 seconds)

Typical Electrical Cable Manufacturing Time?  FAST. 

&#;Because You Require Quality, Quickly! ®&#; is our slogan for a reason. We pride ourselves on being nimble. When your electrical cable delivery truly matters most you can count on 1X Technologies to produce your cable with the fastest turnaround time anywhere relying on the best supply chain in the industry to make it happen. As your chosen wire & cable supplier we will work hard to make sure you get your cable quickly, from the factory floor to your job site as fast as we can. The lead times below are estimates and are dependent upon our supply chain of materials manufacturers but this is a good estimate, as always there can be a give or take with estimates. For a detailed quote contact your 1XTech salesman.

• Typical 600V electrical cable Production time:  2 to 4 Weeks ARO   (ARO = After Receipt of Order).
• Typical 300V electrical or electronic cable Production time: 2 to 4 weeks ARO
• 1KV &#; 2KV  typical electrical cable Production time: 2  to 4 weeks ARO
• 5KV &#; 35KV typical electrical cable Production time: 7 to 8 weeks ARO
• 46KV &#; 550KV typical electrical cable Production time: 10 to 12  weeks ARO
  
  
  

Electrical Cable Manufacturing Capabilities &#; Copper and Aluminum Power Cable 2kV, 5kV, 12kV, 15kV, 25kV, 35kV, 46kV, 69kV, 138kV, 220kV, 550kV

Expedited Electrical Cable Manufacturing Speed

While our normal electrical cable manufacturing speed is the fastest in the industry, we also offer you expedited electrical cable manufacturing services. We have manufactured and shipped 300V electrical cables within just 1 to 2 days, and 600 Volt cables within 5 to 7 days ARO from our first-in-class supply chain.

To expedite an order typically means the electrical cable manufacturing production team will need to expedite materials such as our copper rod, plastics, and chemicals used in the electrical cable manufacturing process.

They are expedited into our electrical cable factory either by hotshot delivery or by air freight. Then the electrical cable manufacturing crew usually works around the clock in order to produce your cable at lightning speed.  

Expedited Electrical Cable Manufacturing Cost vs. Benefit

Because of all the work that goes into expediting our already super-fast electrical cable manufacturing process, it can be costly. However, while the price of the electrical cable product may give some sticker shock at first when having your specialty cable on-site in just days saves your project many thousands of dollars, or in Mike from Nasa&#;s case, millions of dollars. The added cost of the electrical cable turns out to be just a small exchange for the tremendous added value you receive.

Belden Cable Equivalent Manufacturers

1X Technologies Cable Company manufactures over top-of-the-line Belden Cable Equivalents, exclusively made in the USA. Your American-made, award-winning cables are cross-referenced directly from the Belden-Catalog to help you save time and money. You can buy alternatives to nearly every Belden part-number.

 

Electrical Cable Manufacturing Capabilities &#; Cable Reels and Wire Packaging.

1X Technologies Cable Company&#;s electrical cable packaging capabilities are vast. Ask us if you need something different than what you see below, we will check with our first-class network of vendors to see what we can make happen for you. 

XL Cable Manufacturing Capabilities, Custom Cable Manufacturer, Copper Wire, Copper Cable, Submarine Cable, Medium Voltage Cable, High Voltage Cable, Extra High Voltage Cable Manufacturer Supplier

ELECTRICAL CABLE REEL TYPES

1. Plywood Reels
2. Wood Reels
3. Steel Reels
4. Polyfiber Reels
5. Plastic Reels
6. Reel in a Box
7. Heat Treated Wood Reels
8. Heat Treated Wood Pallets
9. Cable Drums

ELECTRICAL CABLE REEL COVERINGS/PROTECTION

1. Cardboard
2. Clear Stretch Wrap
3. Printed Plastic Wrap
4. Wood Lagging
5. Recycled Fiber Board

ELECTRICAL CABLE REEL IDENTIFICATION

1. Descriptive Labels
2. Barcode Labeling
3. Tags
4. Print or Marks on Reels
5. Stickers

Unlimited Electrical Cable Configuration Manufacturing Capabilities.

1X Technologies Cable Company, XXL Wire & Cable Manufacturing Capabilities

• High-Temperature Cable
• Extra Large AWG sizes, up to  MCM / KCMIL
• Multiconductor Cables
• Multipair Cables
• Microminiature Cables
• Coaxial Cables
• Micro coaxial Cables
• Hybrid Cables
• Composite Cables
• Power Cables
• Lead Wire
• Flat, round braids
• Retractable coil cords

 

Custom Cable Manufacturers, Made in the USA

1X Technologies Cable Company manufactures and supplies countless types of custom cable. Precisely, custom electrical cable, custom electronic cable, and countless types of wire and cable in every color you can imagine. We make the cable and wire that makes the world go round. 

Electrical Cable Manufacturing Capabilities Specifications

• Shielding
  Application: Overall and individual conductors/pairs
  Types: Foil, braid, spiral, Foil + braid
• Flexing
  Flex types: Rolling, bending, torsional, continuous
  Flex cycles: Over 20 million
• Ratings
  Temperature: -100 to + 450 C
  Electrical: 30, 150, 300, 600, V through 550KV
• NRTL Approvals
  UL, ETL, FM, CSA, CE, HAR, RoHS, USP Class VI, IEC
• Mechanical/Environmental Manufacturing Capabilities &#; resistance to abrasion, oils, sunlight, chemicals, sterilization (autoclave, ETO, gamma, and more), and UV. Low outgassing.

Electrical Cable Manufacturing Capabilities, Cable Material Types

Electrical Wire & Cable Conductor Materials

• Bare Copper (BC, SBC)
• Topcoat (TCT)
• Overcoat (OVCT)
• Oxygen-Free High Cond. (OFHC)
• Tinned Copper Weld (TCW)
• Bare Copper Weld (BCW)Tinned Copper (TC, TPC)
• IW Prebond® (PB, PBC)
• Tinned Cadmium Bronze (TCB)
• Nickel Cadmium Copper (NCC, NCa)
• Zinc-Coated Steel (ZCW)
• Silver Plated Copper (SPC)
• Percon (High Strength Copper Alloy)

Electrical Wire & Cable Insulation and Jacket Compounds

• Polyvinyl Chloride PVC
• Semi-Rigid Polyvinyl Chloride SR-PVC
• Polyethylene LDPE, HDPE, HMPE
• Polypropylene PP
• Hytrel® (Dupont) TPE
• Thermoplastic Elastomer TPE
• Thermoplastic Rubber TPRFlame Retardant PE FRPE
• Foam Polyethylene FPE
• Thermoplastic Vulcanizate
• Santoprene® (ExxonMobile) TPR / TPV
• Semi-Conductive SC-PE
• Semi-Conductive SC-PVC
• Cross-Linked Polyethylene XLPE
• Fluorinated Ethylene Propylene FEP
• FEP Teflon® (Dupont)
• Ethylene Tetrafluoroethylene ETFE Tefzel® (Dupont)

Additional Specialized Electrical Wire Insulation&#;s

• Irradiated Cross-Linked PVC
• Irradiated Cross-Linked PE
• Silicon Rubber
• Poly Tetrafluoroethylene PTFETapes, Tape Shields, Binders, and WrapsMylar (Polyester)
• Mylar Backed Aluminum Foil
• Foil Free Edge Mylar Backed Aluminum Foil
• Aluminum/Mylar/Aluminum
• Foam Polypropylene
• Spunbond Non-Woven Synthetics
• Non-Woven Fleece Wraps
• Copper Tape
• Mylar Backed Copper
• Tinned Copper TapePaper Separator Tapes
• Tissue Separator Tapes
• Teflon® Tapes
• Water Blocking Tapes (Dry)
• Nylon Binders
• Cotton Tapes and Binders
• Monel Mesh (Parker/Chomerics)
• Stainless Steel TapeFiller MaterialsFibrillated Poly
• Flame Retardant Fibrillated Poly
• Solid Poly Rod
• Flexible Solid Plastic Rod
• NylonSynthetic Rope
• Twisted Jute
• Hot Melt Water Block
• Fibrous Water Block (Dry)
• Cotton
• Kevlar® (Dupont)
• Insulated Kevlar® (Dupont)
• Waxed Kevlar® (Dupont)
• Hot Melt Water Blocking Compound

Custom Electrical Cable Manufacturing Capabilities

SUNUA supply professional and honest service.

How Custom Cable is made at 1X Technologies Cable Company.

 

Custom Electrical Cable, built fast.

1X Technologies excels at manufacturing custom cables. We can build composites, special conductor sizes, special insulation, with everything but the kitchen sink included with materials and supplies from a vast array of well-known vendors.

Wire & Cable Manufacturing Capabilities, Custom Cable, Composite Cable 1X Technologies

The 1X Technologies Custom Cable Advantage:

Advantages of working with the best custom cable manufacturers include being able to:

1. Determine physical and electrical tolerances.
2. Define the components that best fit your application like insulation, shield, jacket, etc.
3. Combine various functions, such as power, signal, coax, shielded subassemblies, and optical fiber into one cable.
4. Optimize the conductor count, stranding, size, and color-code.
5. Save money by specifying the exact quantity & lengths required. We build short runs as low 
6. Build brand recognition by printing your company&#;s logo and information on the jacket.

Electrical Cable Manufacturing Capabilities &#; Typical ICEA Color Codes

K1 COLOR CODE

For Multi-Conductor Cables(Per ICEA Insulated Cable Engineers Association and NEC National Electric Code)

# Base Stripe1 Stripe2 1 BLK 2 WHT 3 RED 4 GRN 5 ORG 6 BLU 7 WHT BLK 8 RED BLK 9 GRN BLK 10 ORG BLK 11 BLU BLK 12 BLK WHT 13 RED WHT 14 GRN WHT 15 BLU WHT 16 BLK RED 17 WHT RED 18 ORG RED 19 BLU RED 20 RED GRN 21 ORG GRN 22 BLK WHT RED 23 WHT BLK RED 24 RED BLK WHT 25 GRN BLK WHT 26 ORG BLK WHT 27 BLU BLK WHT 28 BLK RED GRN 29 WHT RED GRN 30 RED BLK GRN # Base Stripe1 Stripe2 31 GRN BLK ORG 32 ORG BLK GRN 33 BLU WHT ORG 34 BLK WHT ORG 35 WHT RED ORG 36 ORG WHT BLU 37 WHT RED BLU 38 BLK WHT GRN 39 WHT BLK GRN 40 RED WHT GRN 41 GRN WHT BLU 42 ORG RED GRN 43 BLU RED GRN 44 BLK WHT BLU 45 WHT BLK BLU 46 RED WHT BLU 47 GRN ORG RED 48 ORG RED BLU 49 BLU RED ORG 50 BLK ORG RED 51 WHT BLK ORG 52 RED ORG BLK 53 GRN RED BLU 54 ORG BLK BLU 55 BLU BLK ORG 56 BLK ORG GRN 57 WHT ORG GRN 58 RED ORG GRN 59 GRN BLK BLU 60 ORG GRN BLU

K2 COLOR CODE

For Multi-Conductor Cables(Per ICEA Insulated Cable Engineers Association and NEC National Electric Code)

# Base Stripe1 1 BLK   2 RED   3 BLU   4 ORG   5 YEL   6 BRN   7 RED BLK 8 BLU BLK 9 ORG BLK 10 YEL BLK 11 BRN BLK 12 BLK RED # Base Stripe1 13 BLU RED 14 ORG RED 15 YEL RED 16 BRN RED 17 BLK BLU 18 RED BLU 19 ORG BLU 20 YEL BLU 21 BRN BLU 22 BLK ORG 23 RED ORG 24 BLU ORG -# Base Stripe1 25 YEL ORG 26 BRN ORG 27 BLK YEL 28 RED YEL 29 BLU YEL 30 ORG YEL 31 BRN YEL 32 BLK BRN 33 RED BRN 34 BLU BRN 35 ORG BRN 36 YEL BRN

NRTL International Markings for your Manufactured Electrical Cable

You have many choices for your electrical cable testing agency. Because we sell wire & cable that is produced and tested by a lot of different companies&#; and under a lot of different standards here is a list of most of them for your reference.

(UL) &#; Underwriters Laboratories. (RU) Underwriters Laboratories &#; Appliance Wiring Material. (cUL)&#; Underwriters Laboratories (Canada).
Accepted in all Seven Provinces. (IEEE) &#; Institute of Electrical and Electronics Engineers. (NEC) &#; National Electric Code. (IEEE) &#; Institute of Electrical and Electronics Engineers Logo. (CSA) &#; Canadian Standards Association. (ETL) &#; ETL SEMKO. (CEBEC) &#; Belgium Electrotechnical Committee. (CEE) &#; International Commission for Rules for the Approval of Electrical Equipment. (HAR) &#; Symbol for CENELEC. (CENELEC) &#; European Committee for Electrotechnical Standardization. (DEMKO) &#; Danish Electrical Testing Station (Denmark). (ETSA) &#; Electricity Trust of South Australia. (IEC) &#; International Electrotechnical Commission. (IMQ) &#; Italian Institute of the Mark of Quality. (K) &#; KEMA (Netherlands). (NEMKO) &#; Norwegian Board for Testing and Approval of Electrical Equipment. (OVE) &#; Austrian Association for Electrical Technology. (SEMKO) &#; Swedish Institute for Testing and Approval of Electrical Equipment. (NEC) &#; National Electric Code. (VDE) &#; Association of German Electrical Engineers. (SATIN) &#; Electrical Inspectorate (Finland).

 

Typical UL Standards for Wire & Cable Manufacturing

UL 4 Armored Cable
UL 44 Rubber Insulated Wires and Cables
UL 62 Flexible Cord and Fixture Wire
UL 83 Thermoplastic Insulated Wires and Cables
UL 133 Wires and Cables w/Varnished Cloth Insulation
UL 493 Thermoplastic Insulated Underground Feeder and Branch Circuit Cables
UL 719 Nonmetallic Sheathed Cables
UL 814 Glass Tube, Sign and Ignition Cables
UL 817 Cord Sets and Power Supply Cords
UL 854 Service Entrance Cables
UL Machine Tool Wires and Cables
UL Medium Voltage Power Cables
UL Electrical Power and Control Tray Cables with Optional Fiber Members
UL Electric Cable for Boats
UL Metal Clad Cables
UL Reference Standard for Electrical Wires, Cables, and Flexible Cords

Electrical Wire & Cable Testing Capabilities

1X Technologies Cable Company performs many extensive testing capabilities to ensure that your products meet or exceed the unique requirements for our customers&#; applications. Specifically, from eye diagram requirements for special signal applications to cold bend flexibility requirements measured by utilizing a liquid nitrogen chamber. Furthermore, we will gladly work with you to establish methods for testing and reporting of results according to your specific requirements.  Most importantly, we assist you with your validation programs and first article testing.

As you can see above, we carry a variety of agency approvals from certifying bodies such as UL, CSA, ETL, CE, and VDE.

Please contact us for additional information or to discuss your specific requirements.

Vertical Flame Test &#; Wire & Cable Manufacturing Capabilities

A complete DevOps platform

GitLab is a single application for the entire software development lifecycle. From project planning and source code management to CI/CD, monitoring, and security.

This is a self-managed instance of GitLab.

Want more information on FR PE Cable Sheath Materials Factory? Feel free to contact us.