Choosing the right primary crusher for your aggregate ...

Primary crusher is the workhorse that takes blast feed sizes and turns them into smaller sizes that are manageable for other site components&#;the belts, the screens, and eventually any secondary crushers&#;on the road to a finished product. All components at a crushing site depend on the primary crusher functioning properly, which is why choosing the right crusher for the job is critical.

Link to Chunlei

Defining the intended purpose of your primary crusher

The first step in choosing a primary crusher takes place at a high level. It&#;s necessary to identify the purpose the crusher will be used for.

This purpose is a given that precedes the entire decision-making process. Sometimes, a measure of guidance or experience is needed.

The two main components to consider when identifying purpose are feed size and type of material to be crushed. There are a variety of other factors to review as well&#;the long-term strategy for the site, discharge gradation, moisture content of the material, and the targeted amount of production, just to name a few.

Gyratory crushers are typically only used if the targeted amount of production is more than one million tons per year. These machines are made-to-order and often take more than a year to be completed from request, in addition to another month of installation on site. That makes them best-suited for plants with long-term plans. They&#;re ideal for abrasive material, like granite.

Jaw crushers are workhorse crushers and the most commonly used. They&#;re fit for abrasive material as well but are far more portable than gyratory crushers and can be relocated each year as necessary.

Impact crushers are best for less abrasive material, like limestone. These crushers invoke higher wear costs over time but generally provide greater reduction and possibly better shape.

Testing the fit and functionality of your primary crusher

With the overall purpose of your crusher determined, the next step is to home in on the expected performance of crusher model variations. This is where simulations become vitally important. 

The purpose of running a simulation is to determine how the new primary crusher performs and to estimate how the performance will impact load downstream. Depending on the situation (equipment types, site location, etc.), this is typically done through our Bruno software, or similar.

This step may lead to subtle changes in crusher recommendation. For instance, based on simulated results, it may make sense to forego a portable jaw crusher for a stationary model.

After simulation, the next step in ensuring crusher fit is to visually carry the selection through to other components of the plant via a concept drawing. This will include visual representation of the existing crushing site, complete with topographical map and grade elevation, as well as a depiction of impacted components showing the system&#;s flow. A new primary crusher typically requires updates to conveyors and screens as well when replacing existing units for increased capacity.

Properly installing your primary crusher

With the right type and model of crusher chosen, the final step in the process is the implementation of the crusher into the plant.

This varies greatly depending on the context and can often become complicated and difficult. To minimize complexity, be sure the crusher manufacturer or distributor have service technicians with the expertise to support your installation at every step of the way. This includes project management, system configuration, performance verification, and equipment training.

Working with a partner to ensure the proper installation of your primary crusher will free up your time, offer added reliability, and enable a site configuration for maximum production from the start.

 

About the author&#;

Our guest blogger, the Mellott Company, is an official Metso Outotec distributor since . Mellott&#;s journey started in the s as a lumber and coal company, and they have been contributing to the development of the construction industry in the US for nearly 100 years. Today, Mellott provides a full-scope of aggregates solutions ranging from contract crushing and systems engineering to parts sales and service. The company has headquarters and manufacturing campus in Warfordsburg, Pennsylvania, US.

Size reduction is the first step in many materials processing plants. The goal with this step is to reduce large lumps of mined materials, be it rock or mineral-bearing ores, into a conveyable size for stockpiling or further processing.

Producers have many equipment options for material size reduction, including crushers, breakers and sizers, but not all of them are suited for each application. Let&#;s take a look at the different equipment options for material size reduction and compare them for various applications.

What is a crusher?

A crusher is a machine that reduces material via forces of impact, compression, attrition or shear.

The most common types of crushers include Jaw Crushers, Gyratory Crushers, Cone Crushers, Impact Crushers, Roll Crushers and Hammermill Crushers.

Compression crushers, such as Jaws, Gyratories, Cones and Roll Crushers, reduce material by squeezing or compressing it between a moving piece of steel and a stationary piece of steel

Impact crushers, such as Andreas, New Holland and MaxCap crushers, feature a spinning rotor inside a chamber. They reduce material in three ways: by contact with the spinning rotor, by contact with the breaker plates lining the walls of the crushing chamber and by contact with other particles of material that are being flung around inside the chamber.

For more information, please visit crushing equipment.

Hammermills operate similar to impact-style crushers in that they reduce material by its contact with a spinning rotor and with breaker plates lining the walls of the crushing chamber. These machines also provide an attrition feature, grinding the material against a grate for further reduction before it is discharged.

Crushers can handle a wide range of material, from soft to extremely hard and from dry to wet, depending on the type of crusher. Jaw Crushers, Gyratory Crushers, Cone Crushers and Roll Crushers are well known for their ability to crush extremely hard materials that may be abrasive but not sticky. Impactors and Hammermills can handle soft to very hard, mildly abrasive materials that are wet or sticky.

Jaws and Gyratories are more often used as primary crushers, while Cone Crushers, known for providing a good product shape, are often used for downstream crushing to refine the product size. Roll Crushers, Impactors and Hammermills can be used in the primary and/or the subsequent crushing stages.

What is a breaker?

A breaker is a machine that reduces material by breaking it along its natural fracture lines, exploiting the natural weakness of the rock.

Types of breakers include Rotary Breakers and Feeder-Breakers. Rotary Breakers feature a rotating cylinder with internal lifters that continuously lift and drop the material to fracture it along its natural fissures. They also have the ability screen out invaluable material from the product material, in turn, rejecting the harder oversize waste rock.

Feeder-Breakers feature both a drag-chain-style Feeder and rotating pick roll in one machine. Material is dumped or loaded onto the feeder portion of the machine, which delivers the material to the rotating pick roll at the other end of the machine. The large lumps of material are broken upon their encounter with the picks.

In general, breakers are ideal for breaking material without generating excessive fines. Breakers are not suited for wet, sticky material, highly abrasive material or material other than coal that has a high fines content, such as iron ore. They are commonly used for the primary reduction of large run-of-mine lumps into smaller, more manageable lumps. Feeder-Breakers are often followed by a shaping crusher or sizer, while Rotary Breakers discharge a material that is ready for loading or washing in the coal preparation plant.

What about sizers? Where do they fit?

Sizers are small, compact machines used for material size reduction in a wide range of materials. These machines are rugged enough to handle hard rock and ores yet able to handle coal and other soft, friable materials without creating excess fines. Sizers are also able to handle wet, sticky materials that can cause material buildup in certain types of crushers, such as Jaws and Gyratories.

Sizers feature two rotating roll shaft assemblies that are equipped with breaker teeth. Material larger than the product setting, which is the space between the roll bodies, is gripped by the breaker teeth and compressed through the rolls. A breaker bar underneath the rolls helps to break up any slabby material to provide a uniform, cubical product. Undersize material passes through the rolls and is discharged out the bottom of the machine.

Because of their low profile, Sizers are ideal for underground applications, fitting into spaces with height restrictions or replacing larger crushers

Differences between crushers, breakers and sizers

Besides physical and operational differences, crushers, breakers and sizers are designed for different industries and performing different tasks. While there can be some industry overlap between the three, crushers, breakers and sizers are not always interchangeable.

For example, Rotary Breakers were designed for handling friable coal. They can accept an all-in feed and are capable of scalping out rock and refuse as well as breaking friable material into a smaller size for further processing.

Feeder-Breakers also perform well in ROM coal and other applications where the material is soft and friable. They are typically used in the primary reduction of material to provide a smaller material for secondary or tertiary sizing. Feeder-Breakers are one of the best machines for low fines generation.

Most crushers, especially compression crushers, are great for handling materials that are hard and abrasive, but not sticky. Jaw Crushers and Gyratories do not like excessive fines in the feed, so pre-screening with a Vibrating Grizzly Feeder, Wobbler Feeder or scalping screen of some sort is a must. Jaw Crushers and Gyratory Crushers tend to create fines, so they lend themselves well to applications such as gold where the valuable material is located within the rock. These two types of crushers create slabby, elongated materials, so further sizing and shaping with a secondary or even tertiary and quaternary crusher is necessary.

In particular:

• Jaw Crushers can handle soft to extremely hard, abrasive materials that may be friable but are not wet or sticky.
• Gyratory Crushers can handle hard to extremely hard and abrasive materials that may be friable.
• Cone Crushers can handle soft to extremely hard materials that may be friable but are not wet or sticky.
• Roll Crushers can handle soft to extremely hard materials that may be friable but are not wet or sticky.
• Impact Crushers can handle soft to very hard materials that are wet or sticky.
• Hammermills can handle soft to very hard materials that are wet or sticky.

Sizers are great for handling clay and wet, sticky materials, such as bauxite, nickel laterites, gold oxides and iron ore, and they can handle harder rocks without creating excessive fines and without the need for pre-screening the feed (although the size of machine required may be reduced if adding a Vibrating Grizzly Feeder ahead of the Sizer in high fines applications).

While Sizers can handle much harder material than breakers, they are not always the best option for high-strength or extremely hard materials that would better be reduced by a Jaw or Gyratory. Sizers produce a uniform, cubical product and feature the smallest footprint of any of the other machines described. They are also low-fines generation machines.

Sizes are also much simpler and safer machines to work on compared to other types of primary crushers. Sizers are fitted with motorized tramming wheels to move the machine into a maintenance position, whereas maintenance for Jaws and Gyratories often takes place inside the crusher.

Which option is best?

Whether you need a crusher, breaker or sizer largely depends on the material to be crushed. Knowing the characteristics of your feed material is the first step in choosing the right equipment to perform the material size reduction.

First, what material are you processing? Is it soft or hard? Dry or wet? Is it sticky?

Other important information to consider when choosing a crusher, breaker or sizer for an application includes:

• Method of extracting the raw material
• Method of feeding the raw material to the crusher, breaker or sizer
• Desired production rate
• Desired products

From this information, you will be able to narrow down whether a crusher, breaker or sizer is the best option. You may also be able to determine what type of crusher, breaker or sizer is best suited for the job.

In the end, choosing a crusher, breaker or sizer for an application is not something to be taken lightly. Entrust a reputable equipment manufacturer who can ensure a selection that will help you meet your production goals at the most ROI.

The company is the world’s best jaw crusher machine supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.